Intended Use - New Holland B95CTC Operator's Manual

Intended use

This machine has been built with the most advanced tech-
nology and in accordance with recognized safety rules.
The machine must be used according to its intended use,
respecting the safety and precautionary rules and strictly
following the operating instructions. Any functional disor-
ders, especially those affecting the safety of the machine,
should therefore be rectified immediately.
WARNING
Avoid injury!
Using the machine for purposes other than or
beyond the intended use is not allowed; for
example:
- for the transportation of persons,
- as a working platform,
- for pulling attached loads,
- for pulling or transporting loads without the
intended working equipment.
Failure to comply could result in death or se-
rious injury.
The manufacturer/supplier cannot be held responsible for
any damage resulting from unintended use. The risk in-
volved in such misuse lies entirely with the user.
ATTENTION: For clarity purposes, some figures in this
manual show the machine with protection panels or cov-
ers removed. Never operate the machine with any pro-
tection panels or covers removed.
ATTENTION: It is absolutely forbidden to tamper with
and/or change the setting of any of the hydraulic system
valves to avoid damaging machine components, with a
consequent risk for personal safety.
The current operator's manual is the user's guide for cor-
rect run-in, use and maintenance of the machine.
Carefully read this operator's manual and store it in the
cab for quick location and reference.
Instructions concerning safety, operation and mainte-
nance have been developed to permit safe service and
operation of this machine.
In the event of queries or suggestions relevant to your
machine do not hesitate to address to your dealer. Deal-
ers have qualified and trained personnel at disposal as
well as original spares, means and equipment suitable to
carry out all necessary maintenance.
Do not use this machine for any applications or purposes
other than those described in this manual. If you use
this machine for duties involving the use of attachments,
accessories, or special tools, consult your dealer to make
sure that the adaptations or modifications carried out are
in conformity with the machine's technical specifications
and with current regulations on safety.
1 - GENERAL INFORMATION
Any modifications or adaptations which are not approved
by the manufacturer may invalidate the machine's original
conformity with safety requirements.
NOTICE: The engine and fuel system on your machine
are designed and built to government emissions stan-
dards. Tampering by dealers, customers, operators and
users is strictly prohibited by law. Failure to comply with
this prohibition could result in government fines, rework
charges, invalid warranty, legal action and possible con-
fiscation of the machine until rework to original condition
is completed. Engine service and/or repairs must be car-
ried out by a certified technician only.
Before entrusting this machine to an operator, make sure
that:
The operator is qualified to operate the machine cor-
•
rectly and safely.
The operator has read and fully understood the in-
•
structions given in this manual.
W1142B
Consult your dealer to obtain extra manuals or manuals
in other languages.
Your dealer is at your disposal for any further information
you may need.
Spare parts
The "non-genuine" spare parts have not been checked
and authorized by the manufacturer.
and/or use of such products may have negative effects
on the machine design features and could impair its
operation safety. The manufacturer is not liable for any
damage caused by "non-genuine" spare parts or acces-
sories.
Warranty
This machine is under warranty according to the regu-
lations in force in your country and in compliance with
the sales agreement drawn up with the dealer. The war-
ranty, however, expires if the operation and maintenance
instruction for this machine and contained in this manual,
have not been followed.
NOTE: Each machine is supplied complete with a copy
of this manual. Descriptions and illustrations provided
herein are not binding. The manufacturer, provided that
the basic characteristics of machine types described and
shown in this manual remain the same, reserves the right
to change components, parts and accessories supplied
without any commitment to timely update this publication,
and this any time it deems it convenient for improvement
purposes or due to commercial or manufacturing require-
ments. For exact information, please consult your dealer
or contact the manufacturer's branch offices, who remain
at your disposal for further help.
1 - 2
The assembly