Lifting Loads With Backhoe Attachment - New Holland B95CTC Operator's Manual

6 - WORKING OPERATIONS

Lifting loads with backhoe attachment

Move the machine to a level and firm ground.
Retract the loader bucket completely and then let the
bucket weight press against the ground.
Lower the loader attachment until the front wheels just
touch the ground without supporting the weight of the ma-
chine.
Lower the stabilizers until the rear wheels just touch the
ground without supporting the weight of the machine.
If the machine is equipped with a telescopic dipper, it is
mandatory for it to be completely retracted and mechani-
1
MOLI12LBB0306AA
cally locked.
Use the load fixing point: the ring (1) on the backhoe
bucket connecting rod and never use other load fixing
points.
It is forbidden to weld hooks or lugs to the bottom of buck-
ets.
The maximum authorised load must not exceed 1000 kg
(2200 lb).
Use slings and chains in perfect conditions, able to sup-
port the load and equipped with an efficient safety device.
2
LEEN12T0679AA
6 - 36