Climate Controls; Heating And Air Conditioning Controls - New Holland B95CTC Operator's Manual

CLIMATE CONTROLS

Heating and air conditioning controls

The heating, ventilation and air conditioning controls are
located on the right side of the cab (operator's seat in
loader attachment position).
NOTE: In order to use the heating, it is necessary to open
the heater shut-off valve (1) located on the engine's right
side.
Ventilation
This four position knob enables air flow to be adjusted in
the operator's compartment.
Position "0": stop
Position "1": low flow
Position "2": medium flow
Position "3": high flow
Heating (Optional)
This knob (1) enables the air temperature to be adjusted
in the operator's compartment.
To increase the temperature, turn the control knob clock-
wise (warm).
To decrease the temperature, turn the control knob coun-
terclockwise (cold).
3 - CONTROLS/INSTRUMENTS
3 - 68
1
MOLI12LBB0190AB
2
MOLI12LBB0191AB
3
MOLI12LBB0192AB