PREPARING FOR ROAD TRANSPORT
Preparing the machine for road travel
NOTE: The instruments represented may not exactly cor-
respond to the instruments on your machine.
Make sure that the engine accelerator knob (2) is in low
idle position.
Place the seat in the loader attachment position.
Place the backhoe attachment in road travel position.
Stop the engine and remove the starter switch key.
Apply the warning plate (3) to the bucket cylinder rod or
chassis.
5 - TRANSPORT OPERATIONS
5 - 3
1
LEEN12T0638AA
2
LEEN12T0642AA
3
LEEN12T0643AA