Running-In Period - New Holland B95CTC Operator's Manual

4 - OPERATING INSTRUCTIONS

Running-in period

Your machine will last longer and give better and more
economical performance if you pay particular attention to
the engine during the first 20 h of operation.
During this period:
Keep a close watch on the instrument panel.
Operate the machine at normal speeds.
Do not run the engine too much at stalling speeds (with
the wheels turning slowly or stopped and the engine at
full speed).
To ensure adequate lubrication, idle the engine at 1000
RPM for 1 min before increasing the RPM.
Maintain the engine at the normal operating temperature.
Do not run the engine at idle speed for long periods
During the running-in period, the following inspections
and maintenance operations must be carried out in addi-
tion to the operations shown in the Maintenance section:
Every 10 h or daily
Check the engine oil and coolant levels.
Check the transmission and rear axle oil levels.
Check the backhoe and loader attachment lubrication.
Check wheel nuts for tightness.
After the first 50 operating hours
After the first 50 operating hours, consult your Dealer for
the 50 h maintenance recommended by the Manufac-
turer.
4 - 3