Parking The Unit; Engine - Park - New Holland B95CTC Operator's Manual

4 - OPERATING INSTRUCTIONS

PARKING THE UNIT

Engine - Park

When parking the machine, some precautions are neces-
sary.
Move the machine to a level and firm ground, away from
any soft ground, excavations or poorly shored cavity.
Lower the loader attachment to the ground.
Place the backhoe attachment in the road travel position.
Place the direction-of-travel lever and gearshift lever in
neutral position.
Immobilize the machine by means of the parking brake.
Completely raise the stabilizers.
Stop the engine and remove the starter switch key.
Release the hydraulic pressure by operating the control
levers in all directions.
On pilot controlled machines, turn the key to ON and re-
lease the pressure by moving the hydraulic control levers
in all directions.
If the unit is on a slope, place blocks under the wheels in
order to prevent the machine from moving.
1
LEEN12T0640AA
Disconnect the electrical system by disconnecting the bat-
tery master switch.
Check that no part of the machine is protruding onto the
public highway. If this cannot be avoided, install signs in
compliance with the relevant regulations.
4 - 14