Stopping The Unit; Stopping The Engine - New Holland B95CTC Operator's Manual

4 - OPERATING INSTRUCTIONS

STOPPING THE UNIT

Stopping the engine

Check that the direction-of-travel control lever (1) is in the
neutral position.
(Power-Shuttle) place the gearshift lever (2) in neutral po-
sition.
Engage the parking brake by pressing the switch (3).
Allow the engine to run at idle speed for about one minute
in order for the turbocharger to be lubricated correctly.
NOTICE: In cold weather, run the engine at low idle speed
for three to five minutes.
Turn the starter switch key (4) to the OFF position, then
remove it.
NOTICE: If it is necessary to stop the engine for a long
time, place the machine in safety conditions.
1
LEEN12T0637BA_1
4 - 9