Regeneration Inhibit - New Holland B95CTC Operator's Manual

Regeneration inhibit

The regeneration inhibit Selection screen allows the operator to delay the DPF auto regeneration process during the
current key cycle.
NOTE: The regeneration inhibit feature returns to the enable setting by default at the next key cycle.
NOTE: The operator may choose to delay the auto regeneration process. However, continuing to delay the auto
regeneration process will eventually require a forced regeneration.
Disable the regeneration inhibit feature:
1. Press Enter (2) to access the menu screens.
2. Press the up arrow (3) or the down arrow (4) to nav-
igate through the menu screens.
3. When the regeneration inhibit Selection screen dis-
plays, press Enter. The menu screen flashes.
4. Press Enter to disable the regeneration inhibit
process. The display screen changes to indicate
the feature is disabled.
NOTE: The regeneration inhibit disabled image will
reappear on a consistent basis with an audible alert
until the operator enables the feature or turns the
machine off.
3 - CONTROLS/INSTRUMENTS
3 - 35
1
LEEN12T0526FA_4
2
RCPH11TLB008AAD
3
RCPH11TLB007AAD