Replace The Bulbs - New Holland B95CTC Operator's Manual

Replace the bulbs

NOTICE: never touch a halogen bulb with your fingers.
Always use a clean cloth when handling halogen bulbs.
OPERATOR'S COMPARTMENT LIGHT
Remove the lens (1) unscrewing it by turning 90 ° through
its central slot.
Remove the bulb (2) and install a bulb of the same wattage
10 W.
Reinstall the lens (1).
SWITCH LIGHTING
Remove and disconnect the switch concerned.
Remove the bulb holder (1). Remove the bulb and install
a new bulb with the same wattage 1.2 W.
Install the bulb holder and the switch.
BEAMS AND DIRECTION INDICATORS
Remove the four screws and remove the light assembly
(1).
Disconnect the socket from the bulb holder connector. Fold
back the clips, remove the defective bulb and replace it with
a bulb of the same wattage.
Remove out the bulb holder on the outside of the reflector
to replace the direction indicator bulb.
NOTE: to access the direction indicator bulb, remove the
beam cover fastening screw.
NOTE: the beam can be adjusted vertically and sideways
by adjusting the slotted screws.
7 - MAINTENANCE
7 - 89
1
LEEN12T0488AA
2
LEEN12T0704AA
3
LEEN12T0705AA