Steering Column - New Holland B95CTC Operator's Manual

Steering column

The machine is equipped with a hydrostatic power steer-
ing, which considerably reduces the effort necessary to
turn the steering wheel (1). Familiarise yourself with the
effort required to turn the wheel before driving the ma-
chine for the first time.
ATTENTION: Because your machine is equipped with hy-
drostatic power steering, never hold the steering wheel
against either of the steering stops. Failure to observe
this precaution may result in damage to the steering sys-
tem components.
NOTICE: In case of a broken steering hose, the machine
cannot be steered, stop the machine immediately and
contact your Dealer.
In the event of loss of power steering due to engine failure,
the machine can still be driven to a place of safety. The
force necessary to turn the steering wheel and steer the
machine will, however, be much higher.
Adjustable steering column (optional)
The angle of the steering column can be varied through
an approximate range of 10 - 20 °.
Adjustment is by release of the foot pedal at the base
of the column. Apply a light pressure to this pedal and
position the steering column to suit your needs.
With the column in the desired position release the foot
pedal which will lock the column in position.
NOTICE: It is essential that the machine be brought to
a complete stop before attempting to adjust the steering
column tilt position. If this instruction is not observed an
accident may occur.
3 - CONTROLS/INSTRUMENTS
3 - 12
1
MOLI12LBB0106AB
2
MOLI12LBB0107AA