Air Conditioning Compressor Drive Belt - New Holland B95CTC Operator's Manual

7 - MAINTENANCE

Air conditioning compressor drive belt

AIR CONDITIONER COMPRESSOR
Visually check the condition of the belt (1). Replace it if it
is worn or damaged.
To release the belt, loosen the mounting hardware of the
tensioner (3) and loosen the tensioner adjusting screw (2).
Install a new belt.
Adjust the belt tension by means of the tensioner adjusting
screw (2).
1
LEEN11T0368AA
Check the belt at the centre line of the belt (1) with a belt
tension gauge. Specification is 122 - 149 N·m (90.0 - 109.9
lb ft)
NOTICE: after replacing the drive belt, make an adjustment after the first 10 operating hours.
NOTICE: the belt must not be too tensioned (premature bearing wear) not too slack (premature belt wear).
7 - 78