Operating The Loader Attachment - New Holland B95CTC Operator's Manual

Operating the loader attachment

The following instructions do not cover all possible condi-
tions of use of the loader attachment. They only constitute
basic information to enable the machine to be operated
correctly.
Where possible, always use the loader attachment at full
engine speed.
The first time it is operated, manoeuvre the machine in a
clear area, at low speed.
WARNING
Hazard to bystanders!
Material can spill from a loaded bucket. You
must manually roll back a loaded bucket be-
fore lowering the loader.
feature does not automatically roll back the
bucket.
Failure to comply could result in death or se-
rious injury.
Loading operations
To fill the bucket from a stock pile, set the bucket in the
level position and lower the attachment with the control
lever to "float" position.
When the loader has entered the pile, press down the
transmission disconnect button, allow the control lever
to move backwards and then simultaneously operate the
controls to lift and roll back the bucket.
Lift and roll-back of the bucket will increase efficiency as a
level bucket throughout the lifting cycle resists bucket lift
and increases break away effort.
NOTE: Do not be concerned if the bucket is not com-
pletely filled during each pass. Maximum productivity is
determined by the amount of material loaded in a given
period of time. Time is lost if two or more attempts are
made to fill the bucket on each pass.
WARNING
Falling objects!
Dirt slides can be dangerous. Exercise ex-
treme care when undercutting high banks.
Watch for falling rocks and cave-ins.
Failure to comply could result in death or se-
rious injury.
6 - WORKING OPERATIONS
The self-leveling
W0197A
W0021A
6 - 9
1
LEEN12T0650AA
2
LEEN12T0651AA