Maximum Throttle/Cold Start Idle - New Holland B95CTC Operator's Manual

Maximum throttle/Cold start idle

The Idle Increment (engine speed) menu lets the operator configure the cold start idle and/or the maximum engine
throttle settings.
NOTE: The settings do not reset at key cycle.
Cold start idle - Sets the minimum engine speed (up
•
to 1500 RPM) that the engine idles while cold. For
example, if set to 1500 RPM, the cold engine will idle
at that RPM until the engine warms to approximately
20 °C (68 °F). Dealer can adjust the temperature as
needed.
NOTE: low idle automatically adjusts up at higher altitudes
to insure proper performance.
Maximum throttle - Sets the maximum engine speed
•
during operation. The engine will not exceed this
speed.
1. Press Enter (2) to access the menu screens.
2. Press the up arrow (3) or the down arrow (4) to nav-
igate through the menu screens.
3 - CONTROLS/INSTRUMENTS
3 - 40
1
RCPH10TLB424AAF
2
RCPH10TLB423AAF
3
LEEN12T0526FA_4