Safety Rules - Seat Belt - New Holland B95CTC Operator's Manual

Safety rules - Seat belt

WARNING
Roll-over hazard!
Securely fasten the seat belt. Your machine is equipped with a Roll-Over Protective Structure (ROPS)
cab, ROPS canopy, or ROPS frame for your protection. The seat belt can help ensure your safety if it
is properly used and maintained. Never wear a seat belt loosely or with slack in the belt system.
Failure to comply could result in death or serious injury.
Seat belts must be worn at all times.
Keep seat belts in good condition.
•
Keep sharp edges and items that can cause damage away from the belts.
•
Periodically check belts, buckles, retractors, tethers, slack take-up system, and mounting bolts for damage.
•
Replace all parts that have damage or wear.
•
Replace belts that have cuts that can make the belt weak.
•
Check that bolts are tight on the seat bracket or mounting.
•
If belt is attached to seat, make sure seat or seat brackets are mounted securely.
•
Keep seat belts clean and dry.
•
Clean belts only with soap solution and warm water.
•
Do not use bleach or dye on the belts, because this can make the belts weak.
•
Fasten/release
1. Pull the right-hand belt strap from the retractor.
2. Insert the metal end into the latch mechanism of the
left-hand side of the seat.
3. To release, press the red button on the latch mech-
anism. The seat belt will automatically retract.
2 - SAFETY INFORMATION
2 - 22
1
RCPH10TLB155AAF
2
RCPH10TLB156AAF
W0143A