Every 250 Hours; Cab Protection System (Rops/Fops) - New Holland B95CTC Operator's Manual

7 - MAINTENANCE

Every 250 hours

Cab Protection System (ROPS/FOPS)

The machine is provided with a safety structure for the op-
erator: anti-overturn safety system (ROPS) according to di-
rectives ISO 3471, SAE 1040C and safety system against
the fall of objects (FOPS) according to the directives ISO
3449, SAE J231 protection level 2. A ROPS can consist of
the cab frame or of a two or four uprights structure used for
the safety of the operator, so as to minimize the possibility
of severe injuries. The structure and the fastening devices
which constitute the connection with the machine are part
of the ROPS.
The Protective Structure is a special safety component of
your machine.
DO NOT attach any device to the Protective Structure for
pulling purposes. DO NOT drill holes to the Protective
Structure.
The Protective Structure and interconnecting components
are a certified system. Any damage, fire, corrosion or mod-
ification will weaken the structure and reduce your protec-
tion. If this occurs, the Protective Structure MUST be re-
placed so that it will provide the same protection as a new
Protective Structure. Contact your dealer for Protective
Structure inspection and replacement.
After an accident, fire, tip or roll over, the following MUST
be performed by a qualified technician before returning the
machine to field or job site operation.
The Protective Structure MUST be replaced.
The mounting or suspension for the Protective Structure,
operator seat and suspension, seat belts and mounting
components and wiring within the operator's protective sys-
tem MUST be carefully inspected for damage.
All damaged parts MUST be replaced.
7 - 32