Fuel Filter - New Holland B95CTC Operator's Manual

Fuel filter

Move the machine to a level and firm ground.
Raise the loader attachment and install the safety support
strut.
Place the backhoe attachment in the road travel position.
Place the direction-of-travel lever and gearshift lever in
neutral position.
Immobilize the machine by means of the parking brake.
Stop the engine and remove the starter switch key.
Open and raise the engine tilt hood.
Place a container with suitable capacity under the filter.
Unscrew and remove the cartridge (1) by means of wrench
380000670.
Apply a thin layer of clean oil on the seal (2) of the new
cartridge.
Assemble the new cartridge (1).
Manually screw in the cartridge until the seal touches the
filter head.
By means of wrench 380000670, tighten by 3/4 of a turn.
NOTICE: overtightening can damage the filter seal (2).
NOTE: for this replacement, it is essential that an original
spare cartridge is used, as a non-approved part could se-
riously damage the injection pump.
Bleed the fuel system.
7 - MAINTENANCE
7 - 51
1
LEEN12T0685AA
2
LEEN11T0356AA
3
LEEN11T0396AA