Electro-Magnetic Compatibility (EMC)
Interference may arise as a result of add‐on equipment which may not necessarily meet the required standards. As
such interference can result in serious malfunction of the unit and/or create unsafe situations, you must observe
the following:
The maximum power of emission equipment (radio, telephones, etc.) must not exceed the limits imposed by
•
the national authorities of the country where you use the machine.
The electro‐magnetic field generated by the add‐on system should not exceed 24 V/m at any time and at any
•
location in the proximity of electronic components.
The add‐on equipment must not interfere with the functioning of the on board electronics. Failure to comply with
•
these rules will render the warranty null and void.
1 - GENERAL INFORMATION
1 - 4