Backhoe attachment controls
Backhoe attachment controls
NOTE: The instruments represented may not exactly cor-
respond to the instruments on your machine.
NOTICE: before using the backhoe attachment, check
that the lock hook (3) has been disengaged, either by
means of the lever (2) or the switch (1).
NOTICE: Whenever the backhoe attachment is used, the
machine must be resting on the stabilizers.
WARNING
Unexpected machine movement!
Pilot controls have two different backhoe con-
trols patterns; before operating the machine,
check which control function is active.
Failure to comply could result in death or se-
rious injury.
WARNING
Unexpected machine movement!
With the engine running and only the gear
lever in neutral, the machine can engage
and move suddenly if someone accidentally
moves the transmission F-N-R lever. Place
all levers in neutral, lower any implements,
and apply the parking brake before exiting the
machine. Use wheel chocks when parking on
slopes.
Failure to comply could result in death or se-
rious injury.
NOTE: Before Using the backhoe controls, make sure
that the operator's seat is correctly adjusted in the back-
hoe attachment position.
3 - CONTROLS/INSTRUMENTS
W0185A
W1191A
3 - 51
1
LEEN12T0555BA