Every 500 Hours; Engine Oil And Filter - New Holland B95CTC Operator's Manual

Every 500 hours

Engine oil and filter

Move the machine to a level and firm ground.
Raise the loader attachment and install the safety support
strut.
Place the backhoe attachment in the road travel position.
Place the direction-of-travel lever and gearshift lever in
neutral position.
Immobilize the machine by means of the parking brake.
Stop the engine and remove the starter switch key.
Open and raise the engine tilt hood.
Remove the cap (2) of the filler neck.
Remove the protection cap from the engine crankcase
drain valve.
NOTE: drain the engine when it is still hot. The oil will flow
more easily.
Now wait for the oil to completely flow out of the engine.
Fill the engine with new oil.
Capacity (with filter):
- 8 l (2.11 US gal).
Run the engine for a few minutes and check for leaks.
Check the engine oil level by means of the dipstick (1).
NOTE: always wait 15 min to allow the oil to return to the
engine sump before checking the oil level.
Reinstall the cap (2) on the filler neck.
Lower and lock the engine tilt hood.
Remove the safety support strut and lower the loader at-
tachment.
7 - MAINTENANCE
7 - 49
1
LEEN12T0685AA
2
LEEN11T0356AA
3
LEEN11T0361AA