Battery Terminals - New Holland B95CTC Operator's Manual

Battery terminals

Move the machine to a level and firm ground.
Lower the loader attachment to the ground.
Place the backhoe attachment in the road travel position.
Place the direction-of-travel lever and gearshift lever in
neutral position.
Immobilize the machine by means of the parking brake.
Stop the engine and remove the starter switch key.
ATTENTION: To prevent any risk of explosion, observe the
following instructions:
- place the battery switch in the OFF position (1) ;
- when disconnecting the battery cables, always disconnect
the negative cable (-) first;
- when reconnecting the battery cables, always connect the
negative (-) cable last;
- never short-circuit the battery terminals with metal ob-
jects;
- do not weld and grind near batteries;
- keep open flames away and do not smoke near batteries.
Never touch the battery terminals with your hands. This
could generate an electrolysis inside the human body and
damage the body's vital organs.
7 - MAINTENANCE
7 - 46
1
LEEN12T0640AA
2
LEEN12T0578AA_2