3 - CONTROLS/INSTRUMENTS
Backhoe attachment mechanical controls version
Stabilizer mechanical controls
NOTICE: Whenever the backhoe attachment is used, the
machine must be resting on the stabilizers.
Left-hand stabilizer left-hand control lever
This lever has three positions:
Position "0": Neutral. This position stops the movement of
the left-hand stabilizer. As soon as the lever is released,
it automatically returns to the neutral position "0" and the
left-hand stabilizer stops raising or lowering.
Position "1": The left-hand stabilizer lowers.
Position "2": The left-hand stabilizer rises.
Right-hand stabilizer right-hand control
1
LEEN12T0556AA
lever
This lever has three positions:
Position "0": Neutral. This position stops the movement of
the right-hand stabilizer. As soon as the lever is released,
it automatically returns to the neutral position "0" and the
right-hand stabilizer stops raising or lowering.
Position "1": The right-hand stabilizer lowers.
Position "2": The right-hand stabilizer rises.
NOTE: To raise or lower the two stabilizers at the same
time, operate the two levers simultaneously.
NOTICE: Before machine travel or before using the
loader attachment, make sure the stabilizers are com-
pletely raised.
During road travel, the stabilizers must be completely
raised.
3 - 52