Starting The Engine - At Temperatures Below -18 °C (-0.4 °F) (Optional) - New Holland B95CTC Operator's Manual

4 - OPERATING INSTRUCTIONS
Starting the engine - At temperatures below -18 °C (-0.4 °F) (Optional)
This starting system is to be used when the ambient tem-
perature is between -18 °C (-0.4 °F) and -29 °C (-20.2 °F).
The engine block heater heats the engine coolant and is
for use at temperatures below -18 °C (-0.4 °F).
When used in conjunction with engine air heating, the en-
gine block heater will be effective down to -29 °C (-20.2
°F).
Consult your dealer.
The system works on 115 V alternating current.
ATTENTION: To avoid shocks or other injuries, never use
a non-grounded or inadequate extension lead. Always
use a grounded 3 core extension lead with a 3 wire plug
which is rated for at least a 15 A load.
To operate the heater, connect the heater plug to a suit-
able extension lead and switch on for two hours before
carrying out the cold weather starting procedure.
NOTE: The heater may be left switched on for more than
two hours without damage. However, no noticeable in-
crease in the heater's effectiveness will be achieved after
this period of time.
4 - 7