Loader attachment
Organizing the job site
Use the shortest possible work cycles. The location pro-
vided for the trucks is an all important element. Spend a
little time levelling the work area.
A smooth working surface facilitates the work of the
machine and moving and parking the trucks. It gives a
shorter work cycle.
WARNING
Loss of control hazard!
A full bucket in the raised position may cause
the machine to slide when operating over
rough ground.
Keep the bucket as low as
possible during operation for better stability
and visibility. Always operate the machine at
slow speeds over rough ground.
Failure to comply could result in death or se-
rious injury.
ATTENTION: On the job site, always keep the bucket as
close as possible to the ground so as to increase the ma-
chine's stability to the maximum and to ensure perfect vis-
ibility.
ATTENTION: On rough or slippery ground, when the
bucket is full, drive the machine as slowly as possible.
There is a risk of accident if these instructions are not
observed.
6 - WORKING OPERATIONS
W0271A
6 - 6
1
LEEN12T0649AA