Controls/Instruments; Access To Operator's Platform - New Holland B95CTC Operator's Manual

3 - CONTROLS/INSTRUMENTS

ACCESS TO OPERATOR'S PLATFORM

Access to operator's platform
Use the steps (1) and access handles (2) when entering
or leaving the operator's compartment.
CAUTION
Fall hazard!
When entering or exiting the cab, never use
the control levers as handholds.
mount and dismount the machine in a safe
way. Maintain a three-point contact with
steps, ladders, and/or handholds.
Failure to comply could result in minor or
moderate injury.
WARNING
Fall hazard!
Clean the steps and access handles to remove
all traces of grease, oil, mud, and ice (in win-
ter).
Failure to comply could result in death or se-
rious injury.
WARNING
Fall hazard!
Jumping on or off the machine could cause
an injury. Always face the machine, use the
handrails and steps, and get on or off slowly.
Maintain a three-point contact to avoid falling:
both hands on the handrails and one foot on
the step, or one hand on the handrail and both
feet on the steps.
Failure to comply could result in death or se-
rious injury.
3 - CONTROLS/INSTRUMENTS
Always
C0075B
W0139A
W0141A
3 - 1
1
LEEN12T0539AA_2