Forward Controls; Front Controls - New Holland B95CTC Operator's Manual

FORWARD CONTROLS

Front controls

NOTE: The instruments represented may not exactly cor-
respond to the instruments on your machine.
Starter switch key
WARNING
Misuse hazard!
Before starting the engine, make sure you are
fully aware of the location and the function of
each control.
Failure to comply could result in death or se-
rious injury.
Located on the right of the operator's seat (with seat in
loader attachment position), this switch has four positions:
Position "0": not used
Position "1": stop
Position "2": run
Position "3": start
NOTE: This key can be used to lock the cab doors, the
engine guard and the fuel tank plug.
Horn button
To sound the horn, press the button:
(1) on the transmission control lever (only for Power-
•
Shuttle models).
(2) on the loader attachment control lever (only for
•
Power-Shift models).
(3) on the backhoe attachment mechanical control
•
lever (only for mechanical control models).
(4) on the left hand backhoe attachment hydraulic
•
control lever (only for pilot-control models).
3 - CONTROLS/INSTRUMENTS
W0226A
3 - 10
1
MOLI12LBB0105AB
2
LEEN12T0540AA
3
MOLI12LBB0124AB