Transmission Oil Level - New Holland B95CTC Operator's Manual

Transmission oil level

The oil level check should be carried out with the engine
running at low speed and at normal operating temperature.
Move the machine to a level and firm ground.
Raise the loader attachment and install the safety support
strut.
Place the backhoe attachment in the road travel position.
Place the direction-of-travel lever and gearshift lever in
neutral position.
Immobilize the machine by means of the parking brake.
Stop the engine and remove the starter switch key.
Open and raise the engine tilt hood.
Insert the starter switch key and restart the engine by keep-
ing it at low idle.
Extract the dipstick (1), clean it with a clean cloth and com-
pletely insert it into the tube, then take it out again.
If the oil level is below the mini mark, top up.
Stop the engine.
Lower and lock the engine tilt hood.
Remove the safety support strut and lower the loader at-
tachment.
7 - MAINTENANCE
7 - 39
1
LEEN12T0685AA
2
LEEN11T0356AA