Pedal controls
Engine accelerator
Located under the steering wheel, this pedal (1) enables
the engine speed to be increased or decreased.
Deeply press the pedal to increase the engine speed.
Release the pedal to reduce the engine speed.
This pedal is used for travel and for operating the loader
attachment.
NOTE: This pedal is coupled with the engine accelerator
knob/lever. Before using the pedal, make sure that the
manual accelerator is in the minimum speed position.
NOTICE: Never use this pedal when working with the
backhoe attachment.
Brake pedals
Located under the steering wheel, these two pedals (1)
are equipped with a system (2) which enables them to be
locked together or unlocked.
This enables the machine either to be braked (pedals
locked) by pressing either of the pedals or to be turned
(pedals unlocked) to the right by pressing on the right-
hand pedal or to the left by pressing on the left-hand
pedal.
Braking with one pedal only should only be carried out at
low speed.
NOTE: When the pedals are locked and the brakes are
applied, the lamp of the 2WD - 4WD switch turns on the
front instrument panel.
To lock the two pedals together, tilt the latch so it engages
on the right-hand pedal.
3 - CONTROLS/INSTRUMENTS
3 - 13
1
MOLI12LBB0125AB
2
MOLI12LBB0128AB