Hydraulic oil tank breather / filler cap - cleaning
Move the machine to a level and firm ground.
Lower the loader attachment to the ground.
Place the backhoe attachment in the road travel position.
Place the direction-of-travel lever and gearshift lever in
neutral position.
Immobilize the machine by means of the parking brake.
Stop the engine and remove the starter switch key.
Clean the area around the cap.
Remove the cap (1) using the wrench (2) supplied with the
machine.
Make sure that no dirt or foreign bodies enter the hydraulic
oil tank.
Use a suitable grease solvent to wash the cap (1).
Leave the cap to air-dry.
Retighten the plug (1).
NOTICE: before using compressed air, take the necessary
precautions to protect your face.
7 - MAINTENANCE
7 - 45
1
LEEN12T0640AA
2
LEEN11T0392AA