Safety Rules - General - New Holland B95CTC Operator's Manual

Safety rules - General

Understand that your safety and the safety of other workers or bystanders is measured by how you service and oper-
ate this machine. Know the positions and operation of all controls before you try to operate. CHECK ALL CONTROLS
IN A SAFE AREA BEFORE STARTING YOUR WORK.
READ THIS MANUAL COMPLETELY and make sure you understand the controls. All equipment has a limit. Make
sure you understand the speed, brakes, steering, stability, and load characteristics of this machine before you start
to operate.
Most accidents involving machine operation and maintenance can be avoided by following basic safety rules and
precautions. Read and understand all the safety messages in this manual, the safety manual and the safety decals
on the machine before you operate or service the machine. See your dealer if you have any questions.
The safety information given in this manual does not replace safety codes, insurance needs, or federal, state, and
local laws. Make sure your machine has the correct equipment according to these rules or laws.
CNH Italia S.p.A. is continuing to work for your safety by making loader backhoes with better protection and by pro-
viding rules for safe operation.
Do not rush. Walk, do not run.
•
Dirty or slippery steps, ladders, walkways and plat-
•
forms can cause falls. Make sure these surfaces
remain clean and clear of debris.
Wear protective equipment when appropriate. Hard
•
hats, protective glasses, protective shoes, gloves,
reflector type vests, respirators, and ear protection
are examples of equipment that may be required.
Certain protective equipment should be replaced
•
and renewed upon age and wear. Old hard hats
may not afford the original user's intention. Faded
and soiled vest are no longer as highly visible as
original intent. See the manufacture's recommen-
dation.
2 - SAFETY INFORMATION
Wear the seat belt to maximize the protection ca-
•
pability of the cab or ROPS. Inspect the mounting
bolts for the seat belt and the ROPS, if equipped,
on a daily basis to ensure their integrity.
Do not permit riders on the machine or attachments.
•
Remove all loose objects stored in the machine.
•
Remove all objects which do not belong in or on the
machine and its equipment.
Do not operate this machine or perform mainte-
•
nance work if you have not had appropriate training,
and read and fully understand the instructions and
warnings in this manual.
2 - 3