Hydraulic Oil Tank - Oil Change - New Holland B95CTC Operator's Manual

Hydraulic oil tank - oil change

Move the machine to a level and firm ground.
Lower the loader attachment to the ground.
Place the backhoe attachment in the road travel position.
Place the direction-of-travel lever and gearshift lever in
neutral position.
Immobilize the machine by means of the parking brake.
Stop the engine and remove the starter switch key.
DRAINING
Drain oil from the hydraulic tank.
NOTE: when draining, the hydraulic oil must be at operat-
ing temperature.
Place a container with suitable capacity under the hydraulic
oil tank (1).
Unscrew and remove the breather/filler cap (2) and the
drain plug (3).
Wait for the oil to come out of the tank through the hole of
the drain plug (3).
Retighten the drain plug (3).
Drain the hydraulic oil from the hydraulic system only drain-
ing the hydraulic tank.
Wait for the oil to flow out and retighten the fittings on the
tank.
7 - MAINTENANCE
7 - 66
1
LEEN12T0640AA
2
LEEN12T0581AA