Every 1000 Hours; Machine Inspection And Cleaning - New Holland B95CTC Operator's Manual

7 - MAINTENANCE

Every 1000 hours

Machine inspection and cleaning

INSPECTION
Externally check the machine and its working attachments,
checking for possible breaks or damage of the components
or the structure.
Should problems be detected, contact an authorized work-
shop to have the necessary repairs carried out.
Replace the damaged or excessively worn parts with orig-
inal spare parts.
Check the conditions of the hydraulic lines and make sure
there are no leaks. In this case, immediately eliminate
them.
1
LEEN12T0640AA
CLEANING
A correctly performed periodical maintenance helps pre-
serving the value of the machine and the warranty rights in
case of possible corrosion damage.
The necessary products for machine care can be pur-
chased from the Service Department or Spare Part
Service. All instructions reported on packagings must be
carefully observed.
ATTENTION: If used improperly, the products for machine
cleaning can become a danger for your health. They must
always be stored accurately and safely.
The residues of the products for machine cleaning must be
disposed of in an environmentally friendly manner.
ATTENTION: In respect of the environment, the machine
should be washed only at specially provided washing sta-
tions equipped with oil and grease separators, if possible.
Washing machines outside these stations may be even for-
bidden in some regions or countries.
NOTICE: when washing the machine, do not direct the wa-
ter jet onto electrical or electronic components or assem-
blies. Water sprays or jets may cause malfunctions or the
failure of the entire electrical and electronic system.
7 - 54