Loader Attachment Controls - New Holland B95CTC Operator's Manual

Loader attachment controls

Loader attachment controls
WARNING
Misuse hazard!
Before starting the engine, make sure you are
fully aware of the location and the function of
each control.
Failure to comply could result in death or se-
rious injury.
ATTENTION: Before using the controls make sure that
the operator's seat is correctly adjusted in the loader at-
tachment position.
With standard loader bucket
Located on the right of the steering wheel, this nine posi-
tion lever operates all the loader attachment controls. The
speed of movement of each control depends on the angle
to which the lever is tilted. In the intermediate position,
two movements can be obtained simultaneously.
With 4 x 1 loader bucket
The function of the lever is identical to that of the machine
fitted with the standard loader bucket, with the addition of
the clam control.
3 - CONTROLS/INSTRUMENTS
W0226A
3 - 47