Operating Instructions; Commissioning The Unit; Before Using The Machine - New Holland B95CTC Operator's Manual

4 - OPERATING INSTRUCTIONS

COMMISSIONING THE UNIT

Before using the machine

ATTENTION: Read and familiarize yourself with the in-
structions and warnings shown in this manual before op-
erating the machine.
Before using the machine, some precautions are neces-
sary.
Check the levels (engine oil, hydraulic fluid and coolant
fluid) and make sure that the various fluids correspond to
the conditions of use.
Carry out the daily maintenance operations.
Walk round the machine, look for any leaks and inspect
the hoses. Tighten or replace any items as required.
Before undertaking road travel, unlock the attachments,
completely raise the stabilizers and install the safety sys-
tems required by the regulations.
Before road travel or night work, check that the lighting
and signalling systems are correctly operating and cor-
rectly adjusted.
Check the condition of the tires and the tire pressure.
Clean the steps and access handles.
The presence of oil, mud or ice (winter) can cause acci-
dents.
4 - OPERATING INSTRUCTIONS
Make sure they are always clean.
Clean or replace safety decals which are no longer legi-
ble.
Make sure that the engine tilt hood is closed and latched
correctly.
Remove anything which might hinder visibility. Clean the
windows and the rearview mirrors.
Make sure that no objects or tools are left on the machine
or in the operator's compartment.
Make sure you know how to evacuate the machine (emer-
gency exit via the right-hand door) in case exit through the
left-hand door is impossible.
Make sure that the right-hand door is not locked.
Make sure that nobody is under or on the machine.
The operator should be the only person on the machine.
Make sure that nobody is within the working range of the
machine.`
4 - 1