Loader attachment safety strut
Loader attachment safety strut (B95C -
B95CLR- B110C)
Located on the left-hand side of the loader attachment,
this safety strut enables the loader attachment to be
locked in the raised position for maintenance or servicing
the unit.
Locked position
Completely raise the loader attachment. Stop the engine
and remove the starter switch key.
Remove the split pin (1) and the lock pin (2).
Place the strut (3) on the cylinder rod and install the pin
(2) and the split pin (1) back into the holes in the strut.
NOTICE: It is mandatory to install the safety strut when
carrying out any operation requiring the loader attachment
to be in the raised position.
Lower the loader attachment until the safety strut is firmly
against the cylinder.
6 - WORKING OPERATIONS
6 - 12
1
MOLI12LBB0260AB
2
MOLI12LBB0261AB