Air filter elements - cleaning and replacement
During this operation, or after starting the engine, the air
filter restriction warning lamp (1) may turn on.
At this point, it is necessary to check the conditions of the
air filter and its elements.
If necessary, clean or replace:
the main filter element can be cleaned until it is
•
necessary to replace it;
the safety filter element must not be cleaned.
•
Normally, it is replaced after three cleanings of
the main element.
Move the machine to a level and firm ground.
Raise the loader attachment and install the safety support
strut.
Place the backhoe attachment in the road travel position.
Place the direction-of-travel lever and gearshift lever in
neutral position.
Immobilize the machine by means of the parking brake.
Stop the engine and remove the starter switch key.
Open and raise the engine tilt hood.
7 - MAINTENANCE
7 - 81
1
LEEN12T0582AA
2
LEEN12T0685AA