Pedal Controls - New Holland B95C Original Instructions Manual

Pedal controls

Foot throttle
The foot throttle (1) is under the steering wheel. Use the
foot throttle to increase or decrease engine speed when
traveling. Use the foot throttle to increase or decrease
power for loader operations.
• Press the pedal to increase the engine speed.
• Release the pedal to reduce the engine speed.
NOTE: This pedal is coupled with the hand throttle. Be-
fore using the pedal, make sure that the hand throttle is in
the minimum speed position.
NOTICE: Never use this pedal when working with the
backhoe attachment.
Brake pedals
The two brake pedals (1) are equipped with a locking sys-
tem (2).
Unlock the brake pedals to assist with turns.
• Press the left-hand pedal to help turn the machine to
the left.
• Press the right-hand pedal to help turn the machine to
the right.
Braking with one pedal only should only be carried out at
low speed.
NOTE: Only use the one pedal braking when traveling at
low speeds. Lock the service brake pedals together for
uniform braking and maximum stopping ability.
WARNING
Loss of control hazard!
Brake pedals shall be locked together for road
travel. This ensures uniform brake application
and maximum stopping ability.
Failure to comply could result in death or se-
rious injury.
To lock the two pedals together, tilt the latch (2) so it en-
gages on the right-hand pedal.
3 - CONTROLS AND INSTRUMENTS
W0308A
3-13
1
MOLI12LBB0125AB
2
MOLI12LBB0128AB