3 - CONTROLS AND
ACCESS TO OPERATOR'S PLATFORM
Access to operator's platform
CAUTION
Fall hazard!
When entering or exiting the cab, never use the control levers as handholds. Always mount and dis-
mount the machine in a safe way. Maintain a three-point contact with steps, ladders, and/or handholds.
Failure to comply could result in minor or moderate injury.
WARNING
Fall hazard!
Clean the steps and access handles to remove all traces of grease, oil, mud, and ice (in winter).
Failure to comply could result in death or serious injury.
Entering the machine:
1. Canopy machines proceed to Step 5.
2. Use the starter key to unlock the cab door.
3. Pull the handle (2) to open the door.
4. Fully open the door so that the door grab handle is
within your reach.
WARNING
Moving parts!
Make sure all entry and mechanical access
doors are properly closed before operating the
machine.
Failure to comply could result in death or se-
rious injury.
5. Use the steps (1) and access handles (2) when enter-
ing or leaving the operator's compartment.
3 - CONTROLS AND INSTRUMENTS
INSTRUMENTS###_3_###
W0238A
3-1
C0075B
W0139A
1
RAIL14TLB0456BA
2
RAIL15TLB0036AA