Air-Conditioning Compressor Drive Belt - New Holland B95C Original Instructions Manual

Air-conditioning compressor drive belt

1. Visually check the condition of the belt (1). Replace it
if it is worn or damaged.
2. To release the belt, loosen the mounting hardware of
the tensioner (3) and loosen the tensioner adjusting
screw (2).
3. Install a new belt.
4. Adjust the belt tension with the tensioner adjusting
screw (2).
5. Check the belt at the center line of the belt (1) with a belt
tension gauge. Specification is 122 – 149 N·m (90.0 –
109.9 lb ft)
NOTICE: After replacing the drive belt, make an adjustment after the first 10 operating hours.
NOTICE: The belt must not be too tensioned (premature bearing wear) not too slack (premature belt wear).
7 - MAINTENANCE
7-126
1
LEEN11T0368AA