Fuel filter
1. Move the machine to a level and firm surface.
2. Raise the loader attachment and install the safety sup-
port strut.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
7. Open and raise the engine hood.
8. Place a container with suitable capacity under the fuel
filter.
9. Use a suitable tool and remove the fuel filter cartridge
(1).
10. Apply a thin layer of clean oil on the seal (2) of the new
filter cartridge.
11. Install the new filter cartridge (1).
12. Manually tighten the filter cartridge until the seal
touches the filter head.
13. After contact, by hand, tighten the filter cartridge an
additional 3/4 of a turn.
NOTICE: Overtightening can damage the filter seal (2).
14. Bleed the fuel system.
7 - MAINTENANCE
7-87
1
LEEN11T0356AA
2
LEEN11T0396AA