Transmission Oil Level - New Holland B95C Original Instructions Manual

Transmission oil level

NOTICE: Check the oil level with the engine running at low speed and at normal operating temperature.
1. Move the machine to a level and firm surface.
2. Raise the loader attachment and install the safety sup-
port strut.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
7. Unlock and raise the engine hood.
8. Insert the starter switch key, restart the engine and
keep it at low idle.
9. Extract the dipstick (1), clean it with a clean cloth and
completely insert it into the tube, then extract it again.
10. If the oil level is below the minimum mark, add
H T
YDRAULIC RANSMISSION
level to the mark.
11. Stop the engine.
12. Lower and lock the engine tilt hood.
13. Remove the safety support strut and lower the loader
attachment.
Oil specification and Capacities
Use H T
YDRAULIC RANSMISSION
Capacities
• Machines with power shuttle transmission (2WD):
11.9 L (12.6 US qt)
• Machines with power shuttle transmission (4WD):
14.4 L (15.2 US qt)
• Machines with powershift transmission:
(12.0 US qt)
7 - MAINTENANCE
O - P to raise the
IL REMIUM
O - P .
IL REMIUM
11.4 L
7-63
1
RAIL15TLB0029AA