Loader Attachment Controls; Loader Attachment Control Lever - New Holland B95C Original Instructions Manual

LOADER ATTACHMENT CONTROLS

Loader attachment control lever

(1) Loader control lever:
Controls the loader attachment movement. See "Loader
attachment controls" 3-55 for more details.
(2) Bucket control, 4-in-1 bucket only:
Roll the switch upward to open the bucket (1).
Release the switch to stop.
Roll the switch downward to close the bucket
(2). Release the switch to stop.
The bucket control switch opens or closes the bucket. An
illustration of the different functions are provided on the
decal with a description.
The bucket control switch can also be adjusted to activate
a detent position for specific attachments or working con-
ditions. See "Detent position for loader control auxiliary
hydraulics" on 3-59.
(3) Clutch cutout (backside of the loader control lever):
The clutch cutout button lets the engine
increase speed and supply the loader with
more hydraulic oil for greater loader power
and faster control function. When you push
the clutch cutout button, the transmission is
disengaged from the drive wheels. Release
the clutch cutout button to engage the
transmission power. The machine can move
freely when the clutch cutout button is pushed.
If required, use the service brake to stop the
machine.
(4) Differential lock:
The differential lock button engages or
disengages the differential lock. To engage
the differential lock, ensure that neither rear
wheel is spinning freely and press and hold
the button. Release the button to disengage
the differential lock.
3 - CONTROLS AND INSTRUMENTS
3-54
1
RAIL18TLB0403BA