Parking The Unit; Parking The Machine - New Holland B95C Original Instructions Manual

PARKING THE UNIT

Parking the machine

When parking the machine, follow the safety precautions
mentioned in this manual.
1. Move the machine to a level and firm ground, away
from any soft ground, excavations or poorly shored
cavity.
2. Lower the loader attachment to the ground.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever
in neutral position.
5. Immobilize the machine by means of the parking
brake.
6. Completely raise the stabilizers.
7. Stop the engine and remove the starter switch key.
8. Release the hydraulic pressure by operating the con-
trol levers in all directions.
9. On pilot controlled machines, turn the key to ON and
release the pressure by moving the hydraulic control
levers in all directions.
10. If the unit is on a slope, place blocks under the wheels
in order to prevent the machine from moving.
11. Disconnect the electrical system by disconnecting
the battery master switch.
12. Check that no part of the machine is protruding onto
the public highway. If this cannot be avoided, install
signs in compliance with the relevant regulations.
4 - OPERATING INSTRUCTIONS
4-26
1
LEEN12T0640AA