Starting The Unit; Before Starting The Engine - New Holland B95C Original Instructions Manual

STARTING THE UNIT

Before starting the engine

WARNING
Inhalation/asphyxiation hazard!
Make sure there is proper ventilation before starting the engine.
Failure to comply could result in death or serious injury.
WARNING
Hazard to bystanders!
Before you start the engine, make sure that the area surrounding the machine is clear of all persons,
and that the backhoe swing lock pin is in the LOCK position.
Failure to comply could result in death or serious injury.
DANGER
Avoid injury!
Starting in gear can cause death. Start the engine only from the operator's seat with the transmission
control(s) in neutral.
Failure to comply will result in death or serious injury.
NOTE: See the "Maintenance Chart" 7-23 for more details on the specific procedures in the following list.
Starting for the first time
Before you start the engine for the first time:
• Make sure the machine is properly lubricated and greased.
• Check the engine oil level, engine coolant level, and transmission oil.
• Check that the machine fuel tank is filled with clean fuel that meets the specifications provided in this manual.
• Check that the machine DEF/AdBlue® tank is filled and that it meets the specifications provided in this manual.
• Remove any water or sediment from the water separator.
• Check the tire air pressure and the wheel bolt torque.
At the start of each day
• Adjust the position of the seat so that all controls may be moved through their entire range of motion.
• Fasten the seat belt.
• In the loader operation position, confirm that you are able to push the brake pedals all the way to the end of pedal
action, while sitting with the seat belt fastened.
• If you are not using the backhoe, confirm that the backhoe boom is in the stowed position and the swing lock pin
is in the LOCK position.
• In the backhoe operation position, confirm that you are able to reach all backhoe control levers and switches and
the throttle control. Confirm you can move all necessary controls through their entire range of motion.
4 - OPERATING INSTRUCTIONS
4-5
W0091A
W1449B
D0114A