Climate Controls; Heating And Air-Conditioning Controls - New Holland B95C Original Instructions Manual

CLIMATE CONTROLS

Heating and air-conditioning controls

The Heating, Ventilation, and Air-Conditioning (HVAC) controls are located on the right-hand side of the cab (opera-
tor's seat in loader attachment position).
Ventilation controls
NOTE: The fan control knob circulates the air inside the
cab and does not heat or cool the cab air. Use the heater
control knob or optional Air-Conditioning knob to control
cab temperatures.
The four position fan control knob allows the operator to
control the air flow inside the cab.
Position 0: Off.
Position 1: Low fan speed.
Position 2: Medium fan speed.
Position 3: High fan speed.
Air recirculation
equipped)
The air recirculation rotary knob (1) is on the front
right-hand side of the seat base.
• Move the rotary knob (1) clockwise so that it is in a
vertical to position (3). This will recirculate the air inside
the cab. Minimal air is pulled in from the outside.
• Move the rotary knob (1) counter-clockwise so that it is
in a horizontal position (2). This will pull more air into
the cab from outside the cab. Minimal air in the cab is
recirculated.
3 - CONTROLS AND INSTRUMENTS
with rotary knob (if
3-89
1
RAIL15TLB0536AA
2
RAIL15TLB0548BA