Backhoe Attachment Controls; Remove The Backhoe From The Stowed Position - New Holland B95C Original Instructions Manual

BACKHOE ATTACHMENT CONTROLS

Remove the backhoe from the stowed position

WARNING
Unexpected machine movement!
Before you use the backhoe attachment, make sure that the machine is resting on the stabilizers.
Failure to comply could result in death or serious injury.
WARNING
Unexpected machine movement!
Pilot controls have two different backhoe controls patterns; before operating the machine, check
which control function is active.
Failure to comply could result in death or serious injury.
WARNING
Unexpected machine movement!
With the engine running and only the gear lever in neutral, the machine can engage and move suddenly
if someone accidentally operates this lever. Place all levers in neutral, disengage the power take-off,
lower any implements, and set the parking brake before exiting the machine. Use wheel chocks when
parking on slopes.
Failure to comply could result in death or serious injury.
NOTE: The instruments represented may not exactly correspond to the instruments on your machine.
NOTE: Before using the backhoe controls, make sure that the operator's seat is correctly adjusted in the backhoe
operation position.
NOTICE: Do not attempt to use the backhoe if it is in the lock position. Damage of components may occur.
NOTICE: Always place the backhoe in the stowed position when operating the loader or during road transport.
NOTICE: Always install the swing lock pin in the lock position when operating the loader or during road transport.
3 - CONTROLS AND INSTRUMENTS
3-61
W1326A
W0185A
W0057A