Pressure Sensor - Subaru 2002 IMPREZA Service Manual

#a
PRESSURE SENSOR
FUEL INJECTION (FUEL SYSTEMS)
1O.Pressure Sensor
A: REMOVAL
1) Disconnect the battery ground cable.
2) Remove the idle air control solenoid valve. <Ref.
to FU(D0HC TURBO)-36, REMOVAL, Idle Air
Control Solenoid Valve.>
3) Disconnect the connectors from pressure sen-
sor.
4) Remove the pressure sensor from the throttle
body.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Replace the O-ring for the pressure sensor with
new ones.
Tightening torque:
1.6 N-m (0.16 kgf-m, 1.2 ft-16)
FU(D0HC TURBO)-35