Subaru Impreza 2003 Service Manual page 2957

26.Spot Map Light
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the lens (A) and spot map light mount-
ing screw (B).
(A)
3) Disconnect the harness connectors and remove
the spot map light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. SPOT MAP LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
2. SPOT MAP LIGHT SWITCH
Measure the spot map light resistance.
Switch position Terminal No.
OFF
ON 1 and 2
SPOT MAP LIGHT
LI-00224
(B)
LI-00225
Standard
— More than 1 MΩ
18±5.4 Ω
LI-29
LIGHTING SYSTEM