Subaru Impreza 2003 Service Manual page 3026

GLASS/WINDOWS/MIRRORS
B: INSTALLATION
1) Clean the external circumference of windshield
glass with alcohol or white gasoline.
2) Remove the adhesive layer on the body using
cutter knife to obtain smooth face 2 mm (0.08 in)
thick.
CAUTION:
Be careful not to damage the body and paint
surface.
(1)
(1) Adhesive
(2) 2 mm (0.08 in)
(3) Dam rubber
(4) Glass
3) Clean the body with alcohol or white gasoline to
remove thoroughly chips, dusts, and dirt from body
face.
4) Place the glass on body.
5) Adjust the glass position to make uniform clear-
ance between body and glass in four corners.
WINDSHIELD GLASS
(3)
(2)
(4)
GW-00071
6) Place the matching pins and body on glass.
(5)
(1) Matching pin
(2) Dam rubber
(3) Fastener
(4) 15 mm (0.591 in)
(5) 11 mm (0.433 in)
7) Remove the glass from body.
8) Fit the molding mark (B) to notch (A) and install
it.
GW-26
(5)
(1) (3)
(2)
(4)
GW-00236
(A)
(B)
GW-00237