Subaru Impreza 2003 Service Manual page 3037

2. Datum Points
A: LOCATION
NOTE:
• Datum points are specified for body repair.
• Guide holes, locators, and indents are provided to facilitate panel replacement and to increase alignment
accuracy.
• Both right and left reference points are symmetrical.
1. WAGON MODEL/SEDAN MODEL
(2)
(1)
(5)
(1)
(1) Radiator attaching hole 12 mm
(0.47 in) dia. (Symmetrical)
(2) Fender attaching hole 7 mm (0.28
in) dia. (Symmetrical)
(3) Fender attaching hole 10 mm
(0.39 in) dia. (Symmetrical)
(4) Hood hinge attaching hole 12 mm
(0.47 in) dia. (Symmetrical)
(5) Radiator panel side gauge hole 20
mm (0.79 in) dia. (Symmetrical)
(7) Fender attaching hole 9 mm (0.35
in) dia. (Symmetrical)
(8) Gauge hole 12 mm (0.47 in) dia.
(Symmetrical)
(9) Front suspension crossmember
attaching hole 12.4 mm (0.488 in)
dia. (Symmetrical)
DATUM POINTS
(12)
(74)
(4)
(3)
(10)
(9)
(8)
(7)
(5)
(10) Cowl panel attaching hole 6 mm
(0.24 in) dia. (Vehicle center)
(12) Front glass attaching hole RH 6.5
mm (0.256 in) dia. LH 6.5 × 10
mm (0.256 × 0.39 in) dia.
(18) Fender attaching hole 12 mm
(0.47 in) dia. (Symmetrical)
(19) Fender attaching hole 12 mm
(0.47 in) dia. (Symmetrical)
(20) Outer panel center pillar gauge
hole 12 mm (0.47 in) dia. (Sym-
metrical)
(21) Outer panel center pillar gauge
hole 12 mm (0.47 in) dia. (Sym-
metrical)
(22) Weather strip patch attaching hole
5.2 mm (0.205 in) dia. (Symmetri-
cal)
(70)
(24)
(12)
(71)
(18)
(4)
(3)
(75)
(2)
(19)
BS-3
BODY STRUCTURE
(22)
(73)
(62)
(20)
(21)
(24) Roof panel repair locator hollow
(62) Belt anchor attaching hole 11 mm
(0.43 in) dia. (Symmetrical)
(70) Trim clip attaching hole 8.5 mm
(0.335 in) dia. (Symmetrical)
(71) Harness clip attaching hole 7 mm
(0.28 in) dia. (Symmetrical)
(73) Harness clip attaching hole 7 mm
(0.28 in) dia. (Symmetrical)
(74) Trim clip attaching hole 10 mm
(0.39 in) dia. (Symmetrical)
(75) Insulator attaching hole 8 mm
(0.31 in) dia. (Symmetrical)
BS-00517