Subaru Impreza 2003 Service Manual page 2921

B: INSTALLATION
1. FRONT OUTER BELT
Install in the reverse order of removal.
CAUTION:
• Parts on right and left are not identical. Be-
fore installation, make sure the correct part is
used.
• Be careful not to twist the seat belts during
installation.
Tightening torque:
<Ref. to SB-2, FRONT SEAT BELT, COMPO-
NENT, General Description.>
2. FRONT INNER BELT
Install in the reverse order of removal.
Tightening torque:
<Ref. to SB-2, FRONT SEAT BELT, COMPO-
NENT, General Description.>
C: INSPECTION
1. FRONT OUTER BELT
Check for the following, and replace with new parts
if necessary.
• Pretensioner is cracked or deformed.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
2. FRONT INNER BELT
Check for the following, and replace with new parts
if necessary.
• Inner belt is deformed or damaged.
• Seat belt buckle is engaged improperly.
FRONT SEAT BELT
SB-13
SEAT BELT SYSTEM